Shop 5c1 24207lan HYDRAULIC GEAR PUMP | Partsdic®

Gears: Gear pumps employ two meshing gears—a driving gear (the input gear) and a driven gear (the output gear).

These gears are precisely machined to maintain a tight clearance between them. Inlet and Outlet Ports: The pump has two ports—one for fluid intake (inlet) and another for fluid discharge (outlet). These ports are connected to the hydraulic circuit. Shaft: The gears are mounted on a common shaft, which is connected to a power source, such as an electric motor or an engine. Bearings and Seals: Bearings support the shaft, ensuring smooth operation, while seals prevent fluid leakage between moving parts. Functionality: The operation of the 5C1 24207lan hydraulic gear pump can be summarized in the following steps: Fluid enters the pump through the inlet port when the gears are in a meshed position. As the shaft rotates, the gears begin to separate, creating a low-pressure area between them. This low pressure causes fluid to be drawn into the pump from the hydraulic reservoir or tank. As the gears continue to rotate, the fluid is carried between the gear teeth to the outlet side of the pump. The meshing gears force the fluid out of the pump through the outlet port at high pressure.

The discharged fluid then flows into the hydraulic system, where it is used to perform work, such as actuating cylinders, motors, or other hydraulic components.

Performance Characteristics: The 5C1 24207lan hydraulic gear pump offers several notable performance characteristics: High Efficiency: Gear pumps are known for their efficiency, as they can maintain consistent flow and pressure, even at high speeds. Compact Size: These pumps are relatively small and lightweight compared to other types of hydraulic pumps, making them suitable for tight spaces and mobile applications. Reliability: The simple design of gear pumps results in fewer components prone to failure, increasing their reliability and reducing maintenance requirements. Smooth Operation: Properly machined gears and bearings result in smooth and quiet operation. Moderate Pressure Ratings: Gear pumps typically operate in the medium-pressure range, making them suitable for a wide range of applications but not for high-pressure hydraulic systems.

Shop 5c1 24207lan HYDRAULIC GEAR PUMP | Partsdic®

Gears: Gear pumps employ two meshing gears—a driving gear (the input gear) and a driven gear (the output gear).

The discharged fluid then flows into the hydraulic system, where it is used to perform work, such as actuating cylinders, motors, or other hydraulic components.

分享至微信分享

分享至微信

分享至微信